Skip to content
- Check the battery: Make sure the battery is fully charged or replace it with a new one.
- Check the sync cord: Ensure the sync cord is properly connected to the camera and the strobe flash.
- Check the flash trigger: Make sure the flash trigger is properly connected to the camera and the strobe flash.
- Check the flash mode: Ensure the Jinbei strobe flash is set to the appropriate flash mode for the shooting situation.
- Check the flash power: Ensure the Jinbei strobe flash is set to the appropriate power output for the shooting situation.
- Check the recycle time: Allow the Jinbei strobe flash enough time to recycle between shots.
- Check the camera settings: Ensure the camera settings are correct for using a Jinbei strobe flash, such as the shutter speed and aperture.
- Check for interference: Make sure there are no sources of interference, such as other electronic devices, that could be affecting the Jinbei flash.
- Check the flash tube: Inspect the flash tube for any signs of damage or wear, and replace if necessary.
- Contact customer support: If the issue persists, contact Jinbei’s customer support for assistance. They may have specific troubleshooting steps or recommend sending the strobe flash in for repair.